Wood products

What is LSL?

LSL is part of a family of products, structural composite lumber (SCL), that are made of dried and graded wood veneers, strands or flakes that are layered upon one another and bonded together with a moisture-resistant adhesive into large blocks known as billets. Other products in this group include laminated veneer lumber (LVL) and parallel strand lumber (PSL). 

What is LSL used for?

LSL is used primarily as structural framing for residential, commercial and industrial construction. It is suitable for headers and beams, tall wall studs, rim board, sill plates, millwork and window framing. LSL also offers good fastener-holding strength. It can also be left exposed as a design feature.

Earth Sciences Building, UBC
Photo credit: Don Erhardt

How’s LSL made?

LSL is similar to LVL in many ways, with the exception that it uses flakes, and not layers of veneers. The flakes are pressed together with heat—using a steam injection press—and bonded by adhesives. In the case of LSL, flaked wood strands—the same as the raw material used for oriented strand board (OSB)—are blended with a waterproof adhesive (called isocyanate) to form billets that can be cut to a range of sizes. LSL does not have a common standard of production and common design values. Design values are derived from test results analysed in accordance with CSA O86 and ASTM D5456 and the design values are reviewed and approved by the Canadian Construction Materials Centre (CCMC).

Mass timber on the rise

A collection of mass timber videos, fact sheets, infographics, and resources

Advancing the use of mass timber supports new jobs and long-term investments in value-added manufacturing, green building, and forest sector diversification. This collection of key resources helps to both show and tell how BC is leveraging the mass timber movement to help deliver more value out of BC’s forests.

Will LSL burn in a fire?

LSL is permitted and is safe to be exposed in accordance with building codes. LSL, like other mass timber products, naturally resists fire because it chars. In the event of a fire, this char on the outside forms a protective layer while retaining strength. This slows combustion allowing time to evacuate the building safely.

In fire testing of LSL (along with LVL and PSL) the char rate for composite lumber products were comparable to those of solid-sawn lumber and within the range previously found for different species of solid-sawn lumber.

Mass timber’s fire safety is backed up by rigorous fire testing in Canada and around the world.

Earth Sciences Building, UBC
Photo credit: Don Erhardt

Will LSL rot or mold?

Similar to other wood products, LSL will not rot or acquire mold when designed and installed correctly. Exposure to water should be avoided during and after construction. Sealing the ends and edges of LSL will help ensure resistance to moisture penetration. Following best practices for managing moisture in wood construction will safeguard the product from damage or decay.

Earth Sciences Building, UBC
Photo credit: KK Law

Civic Duty

LSL gives this city hall an attractive cost-effective ceiling design

LSL is used for the ceiling at the North Vancouver City Hall in an unexpected way. Typically, LSL panels are cut into smaller pieces rather than used as large panels as seen here. This innovation not only looks good but means ceiling component can be prefabricated and installed with greater ease and speed. A sister product, parallel strand lumber (PSL) is used as hollow box beams to form the “eyebrow” overhangs of the building.

How does LSL compare to other building materials?

LSL a solid, highly predictable, uniform wood product made from smaller, fast-growing trees not suitable for conventional solid-sawn lumber. Its consistency in quality streamlines construction and reduces waste on the job site.

Many species can be used interchangeably without impacting performance. This efficient use of wood fibre adds to its eco-friendly benefits and makes it an attractive alternative to more carbon-intensive materials. Like most wood products, it is well-suited to prefabrication. LSL is a cost-effective solution for a wide range of framing applications. It will generally have lower strength and stiffness properties than LVL.

Audain Art Museum, Whistler
Photo credit: Derek Lepper Photography

BC Wood Supplier Directory

Looking to use LSL in your next project?

With the province of British Columbia recognized as a global leader in sustainable forest management, you can specify BC forest products with confidence. Connect with suppliers of laminated strand lumber today.

Audain Art Museum, Whistler
Photo credit: James Dow, courtesy Patkau Architects